background

Z Purlins

Z Purlins

We are recognized as one of the region's largest and most flexible producers of Z-purlins / C-channels - the secondary structural members used to support the roof sheeting / wall cladding. 

Tiger profile facilities are well equipped for producing Z-purlins and C-channels, which are the secondary structural members used to support the roof sheeting and wall cladding.

Flange widths / lip size / flange angles of the sections can be set as per the requirement of the client. Besides being economical to use, these purlins and channels sections give an excellent strength-to-weight ratio, thus giving tremendous cost savings. They are manufactured from galvanized coils conforming to ASTM - A 653, Grade D having a yield strength of 345Mpa.

The range for depth of these purlins varies from 100mm up to 450mm and thickness varies up to 3.5mm.

The purlins and channels are custom made to the desired size having the flexibility of its connection to the main structure either by overlapped system or sleeved system.

The anti-sag rods, connection fasteners for these purlins can also be designed and supplied on client’s request.

Characteristics:

  • High strength to weight ratio
  • Economical
  • Can be used for large spans up to 11.0m
  • Better quality and finish
  • Quick installation
  • Customer made to requirement

Section Z or C Thickness Yield Stress Mass Kg/m
75-95 0.95 550 1.26
75-12 1.2 500 1.59
75-15 1.5 450 1.97
100-10 1.0 550 1.77
100-12 1.2 500 2.10
100-15 1.5 450 2.61
100-19 1.9 450 3.29
100-24 2.4 450 4.13
150-10 1.0 550 2.40
150-12 1.2 500 2.86
150-15 1.5 450 3.58
150-19 1.9 450 4.50
150-24 2.4 450 5.66
200-12 1.2 500 3.59

Above mentioned weights are estimated, real wight might vary.

For further information feel free to contact Ahmad Tasleem on +92-333-2442233.

background